cui .com date 06/23/2011 page 1 of 5 series: 6 w wall plug description: switching power supply model output voltage output current output power ripple and noise 1 ef ciency level nominal (vdc) max (a) max (w) max (mvp-p) eps030100 3 1 3 100 iv eps033100 3.3 1 3.3 100 iv eps045100 4.5 1 4.5 100 v eps050100 5 1 5 100 v eps060100 6 1 6 100 v eps090066 9 0.66 6 100 v eps120050 12 0.5 6 150 v eps150040 15 0.4 6 150 v eps180033 18 0.33 6 180 v eps240025 24 0.25 6 240 iv notes: 1. at full load, 100 ~ 132 vac input, 20 mhz bandwidth oscilloscope, each output terminated with 10 f aluminum electrolytic and 0.1 f ceramic capacitors. part number key eps030100 - p xxxx - cxx dc plug type: see output plug options on page 4 base number example of 3 vdc, 1 a reserved for custom con gurations features ? up to 6 w power ? compact size ? single output from 3 ~ 24 v ? overload, over voltage, and short circuit protections ? 100 ~ 132 vac input voltage ? meets eisa / efficiency level iv regulations ? custom designs available rohs u ? c l us
cui .com cui inc series: 6 w wall plug description: switching power supply date 06/23/2011 page 2 of 5 input parameter conditions/description min typ max units voltage 100 132 vac frequency 47 63 hz input current 1a inrush current 120 vac, inrush lasts no longer than 0.5 ms before settling to steady state current 40 a no load power consumption 0.5 w output parameter conditions/description min typ max units line regulation 1 % load regulation 5 % temperature coef cient 0 ~ 40c, full load, after initial 1 hour warm-up 0.02 %/c start-up time time needed to reach regulation 3 s hold-up time at 115 vac, full load 10 ms protections parameter conditions/description min typ max units over voltage protection clamped by internal protection zener overload protection fold-back current limiting starts at 105 ~ 160% of the rated output current. auto-recovery. long term exposure to overload condition may reduce product reliability. short circuit protection continuous, auto-recovery upon removal of short safety & compliance parameter conditions/description min typ max units isolation voltage input to output at 10 ma for 1 minute 3,000 vac isolation resistance input to output at 500 vdc 100 m safety approvals ul/cul 1310 emi standard fcc part 15 class b leakage current at 120 vac 0.5 ma class 2 power supply yes mtbf at 25c, per mil-hdbk-217e 240,000 hours rohs compliant yes environmental parameter conditions/description min typ max units operating temperature 040c storage temperature -10 70 c operating humidity 20 80 % storage humidity 10 90 %
cui .com cui inc series: 6 w wall plug description: switching power supply date 06/23/2011 page 3 of 5 62.3 1.0 12.7 22.3x18.0 26.8 1.0 42 1.0 17.0 1830 100 6.3 3.0 (typ) tolerance: x.x 0.5mm x.xx 0.03mm units: mm note 1: this power unit is intended to be correctly oriented in a vertical or floor mount position. mechanical drawing input plug us blade case size 62.3 l x 26.8 w x 42 h mm tolerance: 1 mm
cui .com cui inc series: 6 w wall plug description: switching power supply date 06/23/2011 page 4 of 5 12 12 stripped and tinned 9.5 9.5 9.5 9.5 9.5 c 5.0 5.0 na 1.7 1.7 0.7 eiaj-3 eiaj-2 eiaj-1 eiaj 4.75 4.0 2.35 p14/p14r p13/p13r d unit b a p12/p12r mm mm mm 2.5 2.1 5.5 5.5 p11 c unit b a p10 mm mm 9.5 9.5 9.5 1.05 1.35 1.3 2.5 2.1 3.8 3.8 3.5 5.5 5.5 p9/p9r p8/p8r p7/p7r p6/p6r c unit b a *tip positive p5 1 /p5r mm mm mm mm mm 4/6!,10.1/2 25!21/6 4/6!,10.1/2 25!21/6 b d c b c d e d b c d d b c b c p1r p1 right angle pxr standard px right angle pxxr st stripped and tinned pxx x x standard pxx n = center negative plug polarity: ?blank? = n/a p = center positive plug angle: ?blank? = standard r = right angle plug type dc plug type eiaj plugs locking dc plug standard dc plug 3.5 mm phono plug 3626 output plug options notes: 1. dc plug length for eps050100-p5p is 9.5 mm
cui inc series: 6 w wall plug description: switching power supply date 06/23/2011 page 5 of 5 this device complies with part 15 of the fcc rules. operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. cui offers a two (2) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to b e accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use . cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 06/29/2006 1.01 applied new spec template 12/28/2010 1.02 removed multiple models, applied new spec template 05/26/2011 the revision history provided is for informational purposes only and is believed to be accurate. revision history
|
